Ruth Lee Fire & Duty Range of Training Manikins. Popular model within the Ruth Lee Fire & Services for common training scenarios including: Confined Space, USAR, Chemical/Biological Hazard (CBRN), Road Traffic Collision (RTC) & general handling exercises. Ruth Lee Duty Range Manikins is now constructed in the same flame retardant Polyester used in Police ballistic/stab[…]
The General Purpose training dummies are our most popular models for the common rescue scenarios such as working at height, confined space, USAR, RTA etc and general handling exercises.
They are weighted to produce an anatomically correct weight distribution and the ‘feel’ of an unconscious patient.
Crucially, these training dummies totally eliminate the risk of pinch welts and bruising being inflicted on trainees, a common injury when using plastic bodied dummies which usually have hard limb joints – for example when a hard knee joint folds over the forearm of a trainee. Our training dummies have soft outer layers and have no hard joints – in fact you can forcibly wrap a knee joint around a trainees forearm with no risk of injury.
Available in 7 sizes and weights from the baby 5kg up to the very heavy 100kg Adult (100kg model usually used for testing harnesses and fall arrest equipment).
The construction methods of the General Purpose training dummy are described in the product detail below.
These training dummies are tough enough to be buried under concrete, have steel lintels, concrete slabs, trees or motor vehicles laid upon them to present a realistic scenarios for rescuers.
The optional protective overalls keep the training dummy clean, and greatly increases the lifespan; they are produced using cotton/polyester woven fabric and are reinforced with high density polypropylene webbing in identified high stress areas. The ends of the arms are further protected with Nylon reinforced PVC. The machine washable overalls are fitted to all sizes of dummy.
The General Purpose training dummies can be used in temperatures up to 100ºC. Above this temperature or where ‘flash-over’ may occur we recommend using our Flame Retardant Rescue Training Dummy.
All training dummies of 20Kg and over are supplied complete with Wellington boots. The boots protect the legs if the dummy is dragged along the ground.
The General Purpose training dummy is ideally suited for ‘dry’ rescue conditions. If it gets wet it needs to be hung in a dry airy place to dry before storage. For a wet environment rescue scenario, such as a chemical spillage, storm drain or cave rescue where the dummy needs to lie in water for any period we recommend using the HazMat Rescue Dummy which has the same inner construction but the outer carcass is made of a tough nylon reinforced PVC material which is ideally suited for this purpose.
All training dummies are screen printed with a warning triangle, a handling risk note and space for you to record the asset number the date of purchase on the head. These dummies have been issued with NATO stock numbers as below.
As can be seen from the image opposite with the overalls removed, the Multi Purpose training dummy has an outer carcass of 425g rot-proof canvas with all seams double stitched. High density polypropylene webbing provides extra strength and durability, especially at the high stress points.
The flexible inner core is weighted to human proportions using 2Kg packets of 5-10 mm crushed, washed stone aggregate. The weight packets are then sewn into a nylon inner, with all these body parts (arms, legs, chest etc) tied to the outer carcass using Polypropylene webbing. This method of construction prevents ‘slumping’ of the weight pouches and allows the dummy to maintain it’s shape when in use.
These inner components are separated and padded using 25mm polyurethane foam which results in a dummy with the life-like feel of a real casualty.
If the head gets badly soiled you can now remove the red head cover and wash it.
The Prestan Professional AED Trainer provides quality, durability and affordability like no other trainer in the market. Clear, confident voice instructions that provide easy-to-follow directions and preconfigured scenarios make training students easier. The revolutionary Pad sensing system also increases the practicability of the Trainer.
• English/Spanish capability
• Compatible with any CPR manikins
• Can be used to train in both semi-automatic and fully-automatic versions
• Metronome and counts upward by 10’s ending at 30 to help the student with chest compressions
• Includes a scenario, volume control, and language button
• Includes 5 scenarios
• Pads can be used at least 25-30 times during CPR/AED classes
• Contains a pad testing system
• Pads are pre-connected
• Pads have an embedded ‘switch’ in the pad which senses that the AED Trainer pads are attached to the manikin torso
• The silicone base adhesive on the pads, coupled with the foam structure
• Software Modules meets AHA 2010 guidelines and modules are easy changeable when there is new guidelines or change of languages
• Powered by 4 units of “C” Size Batteries
• Remote Control is optional and available separately
The Act Fast Anti Choking Trainer is a one of a kind training device that CPR instructors use to realistically teach the abdominal thrust maneuver.
The Anti Choking Trainer’s design is simple yet effective. It is a lightweight neoprene vest worn by students that allows teaching of the abdominal thrust maneuver in a variety of realistic scenarios. When correct hand placement and technique are used, a soft foam plug shoots from the trainer, instantly providing a strong visual feedback that students will never forget.
Lets review the video how it works
Prestan’s CPR Practice Shields are designed for use with all manikins and continues with Prestan’s theme of products that provide for cost effective training. It’s uniquely engineered translucent film is designed with specific tensile and modulus properties so that it drapes the face of the training manikin easier and stays on the manikin better during use.
It’s revolutionary markings insure that the student will always use the correct side of the shield, minimizing cross-contamination by the trainees.
The ‘Green Label’ on one side indicates that is the side that should be facing the student as indicated by the words ‘THIS SIDE UP ‘
A circular label with a Red ‘X’ on one side of the face shield indicates that the student is to use the other side (Green Label) of the shield facing up.
Thank you for visiting us. Feel free to browse around for what you needs, and don’t be hesitated to contact us if you needs any assistance.
Our Products and Services
- Supply of Training Aids & Teaching Aids (CPR Manikins, Rescue Manikins and etc.)
- Supply of Fire and Rescue Equipment
- Supply of Occupational Safety & Health Equipment (PPE)
- Supply of Medical & Home-care patient Equipment
- Provide Training Services
find out more About Us …